Wednesday, November 4, 2009

Sony STR-KS360 Bell Expressvu (DishTV) Remote Code

For anyone trying to get their Sony STR-KS360 Amp/Receiver working with their Bell Expressvu remote, the code is 766.

Here is the code/procedure:

  1. Press and hold the Aux button for three seconds (until the lights blink)

  2. Press 2 (to select Tuner/Amp)

  3. Press 766

  4. Press #


Aux should blink.  Voila

If you'd like your remote to control your amp/receiver volume while watching the satellite:

  1. Press and hold the AUX button for 3 seconds.

  2. Press #

  3. Press + (the volume UP button)

  4. Press 0 (zero)

  5. Press #


Note: I finally found a good code list in the DishTV docs (I believe it is the same remote) here along with good clear instructions on programming the remote can be found here

4 comments:

  1. hey thanks a buch, i have had my sony , str ks360 since jan 2010, and a bell dish as well , and now thanks to your post i can turn the darn thing on and off, with one remote YEAH :)

    ReplyDelete
  2. Many thanks!! This code works for my HT-SF470 as well and with Telus sattelite remote. Used the above to control the volume as well. Worked like a charm.

    ReplyDelete
  3. Won't work for me. After Pressing #, AUX does not flash. Appears the remote does not have code 766 installed.

    ReplyDelete
  4. worked for my sony str-DG520 amp

    ReplyDelete